Niche3D Urchin Wide Flow Pump Guard for VorTech MP10

The Niche3D Urchin Wide Flow Pump Guard is a drop-in upgrade cover for the EcoTech VorTech MP10 QuietDrive that reshapes the pump's output. Angled vanes push the flow outward into a wider, more diffuse pattern, and opened-up side gaps ease the return path for a gentler undertow, so you get broader coverage with less of the harsh, focused blast, and none of it costs you pump performance, power draw, or noise. The solid outer ring also fully encases the propeller, keeping curious fish, shrimp, and anemones out of harm's way. It is 3D printed in the USA from 100 percent reef-safe, non-toxic plastic that will not corrode or leach, and it swaps onto the wet side in seconds. Pair it with the VorTech MP10 QuietDrive pump or a spare MP10 wet-side assembly.

Why Upgrade the Cover

• Wider, softer flow. Outward-angled output spreads the stream across more of the tank and tames dead spots without a second pump.
• Gentler undertow. Larger side openings lower resistance on the return side for smoother circulation.
• Livestock protection. A solid ring encloses the prop so anemones, shrimp, and small fish cannot get pulled in.
• Zero penalty. No change to flow rate, power consumption, or sound level.
• Seconds to install, easy to clean. Pop off the stock cover, press on the Urchin, done.
• Made in the USA. 3D printed from reef-safe, corrosion-proof plastic.

Installation

Power down the pump, lift the wet side off the glass, remove the stock wet-side cover, and seat the Urchin guard in its place. Reattach the wet side to the dry side, power up, and adjust your ReefBeat flow mode to taste. Rinse the guard in tank water during routine cleaning; it pulls off as easily as it goes on.

Specifications

Recommended Pairings

• EcoTech VorTech MP10 QuietDrive, the pump this guard fits
• EcoTech VorTech MP10 Wet-Side Assembly to keep a spare wet side on hand
• EcoTech VorTech Battery Backup for outage protection
• Browse all saltwater supplies

Frequently Asked Questions

Does it fit older MP10 models? It is designed for the MP10 QuietDrive (MP10wQD) wet side. If you run an earlier MP10, check your wet-side generation before ordering.

Will it reduce my flow? No. It redirects and diffuses the output but does not restrict the pump, so performance and power draw stay the same.

Is it safe for anemones? Yes. Keeping anemones and mobile inverts out of the propeller is one of the main reasons to fit it.

Is the pump included? No. This is the cover only.