Red Sea ReefControl Power Data Cable

The Red Sea ReefControl Power Data Cable is the genuine data lead for the ReefControl Power 8 smart power center. It links the Power 8's data port to a ReefControl Pro or ReefControl Lite controller, or to the Power 8 Control Panel, so every outlet can be scheduled, automated and monitored. Choose the 2.3 m length for a controller mounted away from the power bar, or the short 0.3 m length for a control panel or controller sitting right beside it. Browse the rest of our saltwater and reef supplies for the full ReefControl family.

Why You'll Love It

• Genuine Red Sea part: the same cable and connectors Red Sea supplies with the ReefControl Power 8, so fit and signal are exactly as designed.
• The link that makes the Power 8 smart: the data cable is what lets the controller or panel switch, schedule and monitor the eight outlets.
• Two lengths: 2.3 m reaches from a cabinet-mounted Power 8 to a controller at the display; 0.3 m suits a panel or controller mounted next to the power bar with no slack to hide.
• Plug and play: no setup, just connect the two ends and the controller sees the Power 8.
• Spare on the shelf: a cable is the cheapest part of the system and the one most likely to get pinched behind a cabinet door.

Choose Your Length

Specifications

Complete Your Setup

• Red Sea ReefControl Power 8, the 8-outlet smart power center this cable connects
• Red Sea ReefControl Power 8 Deluxe with Panel, the Power 8 bundled with its control panel
• Red Sea ReefControl Power 8 Control Panel, app-free pushbutton control of the outlets
• Red Sea ReefControl Pro and ReefControl Lite, the controllers on the other end of the cable
• Red Sea ReefControl 12V DC Cable, the spare power lead for the controller itself
• Red Sea ReefControl Grounding Probe, to eliminate stray voltage in the display

FAQ

Does the Power 8 already come with a data cable? Yes, the Power 8 ships with one (check your kit's manual for the full contents). This listing is for a spare, or for the short 0.3 m length when the panel or controller mounts right next to the power bar.

Which length do I need? Measure from the Power 8's data port to where the controller or panel will sit. Anything more than a foot away needs the 2.3 m cable; a panel or controller on or beside the power bar uses the 0.3 m.

Will it work with both ReefControl Lite and Pro? Yes. Red Sea lists the cable as fitting the ReefControl Power with either the Lite or the Pro controller.

Is this the same as the 12V DC cable? No. The 12V DC cable is the controller's own power lead. This cable carries the data link between the Power 8 and the controller or panel.